Got my new steering box brace!!

Reply Subscribe

Thread Tools

Search this Thread

Jul 22, 2010 | 10:00 AM

#31

Marine

Diesel Wrench

Joined: Mar 2007

Posts: 972

Likes: 71

From: Bozeman, MT

Quote:

Originally Posted by Dr. Evil

I believe Bubba is talking about a link to a thread on Pirate 4X4 and Im not sure if that was GRI's brace or someone elses.

Roger.

Jul 24, 2010 | 04:23 AM

#32

millco

Diesel Enthusiast

Joined: Aug 2008

Posts: 358

Likes: 23

From: Twin Falls, ID

Hey, does anyone know what to torque this new 'nut' to that goes on the sector shaft? It is the one that will have the bearing on it that this brace holds in place. . . . . The factory service manual for an '01 says to torque the factory nut to 185 ft. lbs. and I just want to make sure this new one is up to that challenge! Thought I would ask if any one knew for sure. (I'm getting ready to put one on a '99 and then an '02. Later on, I will have to check to see what the torque is in the 3rd gen FSM . . .)
Thanks,
Dan

Jul 24, 2010 | 05:11 AM

#33

NadirPoint

Diesel Bomber

Joined: Aug 2009

Posts: 2,257

Likes: 186

From: CO

Blue Loctite and as hard as I can with a 3/4" breaker bar works for me. Once you're around 200ft/lb. it's not making alot of difference a few pounds one way or the other.

Jul 24, 2010 | 06:24 AM

#34

Uncle Bubba

BOMBARDIER

Joined: Mar 2007

Posts: 12,854

Likes: 1,112

From: Illinois?

Quote:

Originally Posted by Dr. Evil

I believe Bubba is talking about a link to a thread on Pirate 4X4 and Im not sure if that was GRI's brace or someone elses.

Quote:

Originally Posted by Marine

Roger.

In one of my threads on steering issues in the 2nd generation area GRI posted up info on his brace that he built by cutting one a these fancy store bought ones up. What he said made perfect sense when you stop to think about it.

Jul 24, 2010 | 07:15 PM

#35

Marine

Diesel Wrench

Joined: Mar 2007

Posts: 972

Likes: 71

From: Bozeman, MT

Gotcha.
I bought one from Vulcan Performance. I can't wait to get it installed that's for sure.

Jul 29, 2010 | 03:56 AM

#36

millco

Diesel Enthusiast

Joined: Aug 2008

Posts: 358

Likes: 23

From: Twin Falls, ID

Thanks for the info! I got messed up installing the 2nd gen ones. I may have gotten out of one and the other will have to wait until the guy gets back from vacation. Hopefully mine will be here in the next few so I can stick it on! . . . .

Aug 4, 2010 | 11:56 AM

#37

Marine

Diesel Wrench

Joined: Mar 2007

Posts: 972

Likes: 71

From: Bozeman, MT

I think I'll be putting mine on today; what size is the sector shaft nut? What size is the new one?

Thanks!

Aug 6, 2010 | 01:57 PM

#38

Marine

Diesel Wrench

Joined: Mar 2007

Posts: 972

Likes: 71

From: Bozeman, MT

Install was a breeze. Definitely makes the steering feel more solid.

Nov 5, 2010 | 01:38 PM

#39

EOD Topper

Diesel Fan

Joined: Jun 2010

Posts: 15

Likes: 2

From: California

Believe it or not I just bought a reconditioned gearbox from NAPA for $148.00 plus core w/ lifetime warranty. The dealer wanted $118.00 for just a new seal. I also went with the dynatrac joints for $535.00 (mass buy on this forum) and a stabilizer for $189.00 from Larry, see below :

Have questions? Call us any time between 8 am and 6 pm est at 214-414-6470
If you're ready to place your order, just pay below and we will get your dodge steering stabilizer shipped out this week.

model years
'94-'02 Model $189.00 '03-'08 4x4 Model $189.00
Don't forget to check out our other products!
Email:larry@beadseater.net

This site copyright © 2009- 2010 Dodge Steering Stabilizer

Hope this helps you some!!!!!!!

Read more: https://www.dieselbombers.com/5-9-li...#ixzz14R0HS9F4