99 ford 7.3 wont start been sitting for 2 years!!!
#32
#33
ok thanks guys i cant remember if the tach moves when i crank it but i will be headed out to the garage in just a min and i will let ya know what i find out
---AutoMerged DoublePost---
ok guys the tach does not move when im cranking it over!?!?!
---AutoMerged DoublePost---
ok guys the tach does not move when im cranking it over!?!?!
Last edited by iron cowboy; 01-22-2012 at 09:33 AM. Reason: Automerged Doublepost
#34
Then your cps is bad, look at front of motor from under neath, u will see a small sensor with a metal tab, with 2 wires going to it, should be close to middle motor If I remember correctly, I believe its like an 8mm bolt, u can get em at local parts store for fairly cheap, but they tend to fail, so expect to be buying another better one in future but it will get you by.
---AutoMerged DoublePost---
http://i185.photobucket.com/albums/x220/royetoy/camsensor3.jpg. It will look like this
---AutoMerged DoublePost---
http://i185.photobucket.com/albums/x220/royetoy/camsensor3.jpg. It will look like this
Last edited by 99stackedpowerstroke; 01-22-2012 at 10:01 AM. Reason: Automerged Doublepost
#35
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
09-15-2015 07:40 AM
makuloco2000
Ford Powerstroke 03-07 6.0L
1
02-15-2015 02:31 PM