check rhe cps.... cheap if it works only 25 at auto zone...

 

Does the tach move when you crank it? If not then cam position sensor is bad what ^ is talking about, and if it is, don't get I from there it will fail again if you read threads about em u will read that, CSIPSD knows the name of the good ones I don't off hand,

 

ok thanks guys i cant remember if the tach moves when i crank it but i will be headed out to the garage in just a min and i will let ya know what i find out

---AutoMerged DoublePost---

ok guys the tach does not move when im cranking it over!?!?!

 

Then your cps is bad, look at front of motor from under neath, u will see a small sensor with a metal tab, with 2 wires going to it, should be close to middle motor If I remember correctly, I believe its like an 8mm bolt, u can get em at local parts store for fairly cheap, but they tend to fail, so expect to be buying another better one in future but it will get you by.

---AutoMerged DoublePost---

http://i185.photobucket.com/albums/x220/royetoy/camsensor3.jpg. It will look like this

 

hey guys i want to thank you for all the help you guys helped me get her running it turned out to be the cps but it wasnt bad it just so happened that mice like the middle wire on the plug so i i fixed that and jumped in and she fired right up thanks again guys

 

Glad you got her runnin!! any pics of it up yet??

 

not yet but soon just have to get breaks on this weekend and pushed out of the garage