S-10 Kubota Diesel Conversion
#131
#132
#133
Thanks FTE i think I will drill the block for the dip stick. I have a Kubota dip stick....not sure if i need some sort of tube to go in the hole in the block but i do have a dip stick haha. kt44nt Dennis at Diesel Repower sent me mine it was 1800 for the engine, new oil pan, and freight to st. louis mo. they are out of tennessee. His number is 423-965-4817
#134
ennis at Diesel Repower sent me mine it was 1800 they are out of TN .423-965-4817
well
I had posted a note asking for info , dug a little deeper and I saw your note above.
is there any thing I need to know about buying from feller?
I see the webpage is Diesel Engine Motor.com
anyone used dieselenginetrader.com
another site mentions
ustrading.net/Engines.htm 440-877-4321
or
Aaron/Laura Lewan
Diesel Repower
Phone 423-965-4817,
E-Mail aaronlaura@highland.net
Address Clarkrange P.O. Box 2099 38553 TN
well
I had posted a note asking for info , dug a little deeper and I saw your note above.
is there any thing I need to know about buying from feller?
I see the webpage is Diesel Engine Motor.com
anyone used dieselenginetrader.com
another site mentions
ustrading.net/Engines.htm 440-877-4321
or
Aaron/Laura Lewan
Diesel Repower
Phone 423-965-4817,
E-Mail aaronlaura@highland.net
Address Clarkrange P.O. Box 2099 38553 TN
#137
I made my W/P pulley out of 2 pulleys, the original Kubota pulley for the center and then a serpentine outer welded together. I had to cut them apart on the lathe and then center them back up. I also had to machine the original Kubota crank pulley, add an aluminum spacer, and fit the chevy serpentine pulley to that. I think there are pics in the thread somewhere. Don't think you'll find off the shelf pulleys that will work.
#140