5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Hard or no start mornigs

Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2015, 08:09 PM
Robby21NoGlowPlugs's Avatar
Newbie
Thread Starter
Join Date: May 2015
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Hard or no start mornigs

I recently bought the truck and it wouldn't start with a shot of ether. found a fuel leak fixed it started fine. Lawson injector and had a weak one on the return side replace both of them. started and ran fine for a few weeks. now it's having trouble starting in the morning. but some mornings it fires right up. had aftermarket inline filter fuel filter, removed inline fuel filter seem like it ran a little better. tested my lift pump pressure, engine off 10 psi, engine running 5 psi. tested lift pump pressure a week later 8 psi engine off just below 5 engine running. could lift pump be the problem?
 
  #2  
Old 05-05-2015, 08:23 PM
dangerous1965's Avatar
Diesel Bomber
Join Date: Dec 2008
Location: Escondido CA
Posts: 1,713
Received 111 Likes on 105 Posts
Default

Partly lift pump but no start is a sure sign of low compression So you tested all the injectors? And replaced two of them? Feed tubes tight? No fuel in the oil?
 
  #3  
Old 05-07-2015, 11:05 PM
Robby21NoGlowPlugs's Avatar
Newbie
Thread Starter
Join Date: May 2015
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Changed feed hoses and drilled out holes a little bigger on banjo bolt on inlet side of injector pump. Been starting fine since.
 
  #4  
Old 05-09-2015, 02:18 PM
Bigg Redd's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: TEXAS
Posts: 2,448
Received 310 Likes on 299 Posts
Default

I would lean more towards the liftpump myself, but if it worked, then cool! I wouldnt rule out a possible liftpump in the not so distant future tho.
 
  #5  
Old 06-15-2015, 11:44 PM
GasItOut's Avatar
Diesel Fan
Join Date: Dec 2013
Location: Bozeman MT
Posts: 65
Received 2 Likes on 2 Posts
Default wont start without ether

Im having similar problems as it wont start without ether. you guys think injectors would be a logical place to look next for me? I have a raptor fuel pump.

https://www.dieselbombers.com/12-val...-under-1k.html
 
  #6  
Old 06-19-2015, 11:15 AM
rodbuilder's Avatar
Diesel Fan
Join Date: Dec 2010
Posts: 86
Received 12 Likes on 11 Posts
Default

Keep using either on it and you won't have to worry about it running!!!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
94turbostroker
Ford Powerstroke 94-98 7.3L
6
02-26-2016 07:51 PM
Dcbb93
Ford Powerstroke 99-03 7.3L
4
11-30-2015 10:18 AM
Blanton
Diesel In Distress - Support Ticket
2
04-15-2015 06:29 PM
dfish001
5.9 Liter CR Dodge Cummins 03-07
7
03-30-2015 03:07 PM
trab123
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-09-2015 09:44 AM



Quick Reply: Hard or no start mornigs



All times are GMT -5. The time now is 10:29 PM.