98 12V Steering Problem
#1
#2
No its a Dodge problem i think everybody that has a dodge has play in the wheel, they do have some type of screw that i read about but if you mess with it alot of people have had the gear in the box grenade so you would have even a bigger problem.
Im not sure if a steering stabalizer helps with this or not, or that new thing BD has i cant remember what its called
Im not sure if a steering stabalizer helps with this or not, or that new thing BD has i cant remember what its called
#3
#6
If you've already replaced the box and all the tie rods then it's time for a new steering shaft if you want almost all of the play gone.
I put a flaming river shaft in mine. It's greaseable and extremely well made. It took a good amount of play out of my truck's steering.
Slip Shaft for Dodge Trucks
I put a flaming river shaft in mine. It's greaseable and extremely well made. It took a good amount of play out of my truck's steering.
Slip Shaft for Dodge Trucks
#7
yep, steering shaft made a pretty big difference in the 96 I had.
crawl under your truck while it's running and have someone turn the steering wheel back and forth. look at the gearbox where the pitman arm bolts on, you can either feel, see or will in the near future have play on the sector shaft coming outa the gearbox. put a steering stabilizer on it.
everything I did on my 96 practically made it handle like a sports car...Thuren track bar, polyeurethane bushings on control arms and sway bar, bilstein shocks, steering stabilizer and a flaming river steering shaft. it was unreal and I keep wishing I hadn't sold that thing but...hindsight.
crawl under your truck while it's running and have someone turn the steering wheel back and forth. look at the gearbox where the pitman arm bolts on, you can either feel, see or will in the near future have play on the sector shaft coming outa the gearbox. put a steering stabilizer on it.
everything I did on my 96 practically made it handle like a sports car...Thuren track bar, polyeurethane bushings on control arms and sway bar, bilstein shocks, steering stabilizer and a flaming river steering shaft. it was unreal and I keep wishing I hadn't sold that thing but...hindsight.
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
Jonrarick
12 Valve 2nd Gen Dodge Cummins 94-98
3
10-25-2016 01:32 PM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
09-14-2015 06:34 PM