Found something in my bed ?!?!
#21
the old saying "Its better to have it and not need it, then need it and not have it!!"
#22
#23
Well i hope he didnt but its just my luck that something like that would happen....i think im more worried that i cant get the pin out mor so then getting the ball out......if the pin doesn indeed come out do you have to pull the ball up threw the bed or can you drive it down toward the ground? ?
#24
#25
#26
Just a little update. im on the second can of PB Blast and the Marvel Mystery Oil didnt seem to affect it!! im trying to stay away from Heat (i.e. Blue torch) but i have all weekend off to beat on this thing ...i can get to it pretty easy wil a punch and a BFH....i dont think i can get to it with an air hammer but i CAN get to it with a small air chisel if i need to... i just hope it doesnt come down to it! ! !
Thanks for all the Ideas and info so far guys !!!
Thanks for all the Ideas and info so far guys !!!
#27
#28
#29
It is right behind the axle.....i thought that was kind of strange myself as i thought you would want to put the weight right above the axle.....i have no idea why its like that
Punch, BFH, drive the pin out, then pound the ball up.
#30
If and when you resort to heat, run the torch around the outside of the ball. That way, the receiver swells first, and not the ball itself. Be like sweating a gear off a shaft. You can cover the outside of where your heating with a damp rag, it'll keep from burning the paint on the bed. No longer than a minute, otherwise the ball starts to be the same temp, and you'll have to start over.