Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

00 powerstroke dies intermittently

Old Sep 26, 2011 | 08:03 PM
  #1  
wyoranch's Avatar
Thread Starter
|
Diesel Wrench
Joined: Mar 2007
Posts: 551
Likes: 11
From: Stockdale, Tx.
Default 00 powerstroke dies intermittently

Ok, a buddy has a 00 stroke dually that died on him. He was low on fuel so he filled it up and still no start. Dropped the tank and the suction screen or whatever is in there was pretty bad, falling apart. Put on a new one. Also changed fuel filter. Truck started good and ran good for awhile. Now it will start and run maybe 5 minutes then run like crap and die. Starts up after cranking awhile and will die again. Won't run for 5 minutes without dying. Thoughts?
 
Reply
Old Sep 27, 2011 | 01:47 PM
  #2  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Check the fuel pressure... I would bet you have a clogged line or fubar pump.
 
Reply
Old Sep 27, 2011 | 09:09 PM
  #3  
wyoranch's Avatar
Thread Starter
|
Diesel Wrench
Joined: Mar 2007
Posts: 551
Likes: 11
From: Stockdale, Tx.
Default

Yeah, that's my thought. I'm gonna check it tomorrow. Was gonna today but my gauge was bad so I had to get another. Is there another screen on the suction of the pump or is it just the one in the tank and the fuel filter?
 
Reply
Old Sep 27, 2011 | 09:12 PM
  #4  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Should be just the one in the tank, but there are also mixing chambers inside the pickup that can clog...

Best bet is to delete all that crap and just extend it to the bottom of the tank, then reattach the foot. Then add a small diesel rated filter pre pump.
 
Reply
Old Oct 1, 2011 | 09:12 PM
  #5  
CyleMik's Avatar
Newbie
Joined: Oct 2011
Posts: 5
Likes: 0
Default

run some trans fluid and or mystery oil through there works very well. i run trans fluid through my 2000 psd every other tank its has a cleaning agent in it , check you fuel filter to on the engine also
 
Reply
Old Oct 2, 2011 | 01:44 AM
  #6  
wyoranch's Avatar
Thread Starter
|
Diesel Wrench
Joined: Mar 2007
Posts: 551
Likes: 11
From: Stockdale, Tx.
Default

Yeah, the filter is new, first thing I tried. One thing, when I unscrewed the filter the housing wasn't completely full of fuel. Not sure if it should be, I know the cap goes in there a bit so it will displace some fuel. The fuel was maybe 1/2-3/4" from the top. And I was wrong on the year. It's an early 99 if that matters. Made in feb of 98
 
Reply
Old Oct 2, 2011 | 09:05 PM
  #7  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Dont run tranny fluild on your powerstroke please...

Check the fuel pressure...
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bnoel21
12 Valve 2nd Gen Dodge Cummins 94-98
1
Oct 5, 2015 09:51 AM
thatdude38
Diesel In Distress - Support Ticket
0
Aug 31, 2015 05:22 PM
Lsugod85
Ford Powerstroke 03-07 6.0L
2
Jun 20, 2015 05:14 PM
dshopex4
Chevy/GMC Duramax 01-04 LB7
14
Apr 15, 2015 09:40 PM
JMC23
5.9L 24V Performance
3
Oct 28, 2014 11:03 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:53 PM.