Diesel Engine Conversions Diesel Engine Swaps , 4bt Diesel and All Diesel Engine Conversion Related Discussions

Any of you willing to do a swap on my junk

Thread Tools
 
Search this Thread
 
  #1  
Old 08-03-2010 | 02:56 PM
Moon's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 30
Likes: 0
Default Any of you willing to do a swap on my junk

I have an 87 GMC Suburban that needs a cummins powertrain. Any of you guys that have done these swaps want or know who and how much it is going to take to have this done?
 
  #2  
Old 08-04-2010 | 09:48 PM
tltruckparts's Avatar
Diesel Bomber
Joined: Aug 2009
Posts: 2,124
Likes: 102
From: Lincoln, CA
Default

Originally Posted by Moon
I have an 87 GMC Suburban that needs a cummins powertrain. Any of you guys that have done these swaps want or know who and how much it is going to take to have this done?
alot of time and alot of money. other than that its not too bad
 
The following users liked this post:
Moon (09-10-2010)
  #3  
Old 08-06-2010 | 01:13 AM
Mark Nixon's Avatar
Diesel Enthusiast
Joined: Jun 2010
Posts: 366
Likes: 42
From: Palmyra, Nebraska
Default

If I could just get into a building, I'd be more than happy to do conversions, done a few Dodge ones already.

Mark.
 
The following users liked this post:
Moon (09-10-2010)
  #4  
Old 08-10-2010 | 07:31 PM
Moon's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 30
Likes: 0
Default

Originally Posted by Mark Nixon
If I could just get into a building, I'd be more than happy to do conversions, done a few Dodge ones already.

Mark.
Well Mark that would be one fun payed vacation... I have the building and most all the tools we would need. My wife and I are hella good cooks. I might have to plan it after tax returns. If you're serious we can start making this happen!
 
  #5  
Old 09-10-2010 | 11:22 AM
Moon's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 30
Likes: 0
Default

Mark:
I got your PM, but it wont let me send you one until my post counts up.

---AutoMerged DoublePost---

My question to you and to anyone; What would be a rough idea of how much this will cost from start to finish?

---AutoMerged DoublePost---

Now I know there's many ways to do this, but I am talking the way that will cost the least to get the burb just to where it will pull my 25 foot camp trailer and two wheeler on a small trailer up the canyon without heating up or breaking down.

---AutoMerged DoublePost---

After that, I can bomb proof it a little at a time.

---AutoMerged DoublePost---

Next question is; Those of you that put these cummins engines in, where do you get them? And those who do this on a very limited budget, what are some tips?
 

Last edited by Moon; 09-10-2010 at 11:22 AM. Reason: Automerged Doublepost
  #6  
Old 09-10-2010 | 11:29 AM
tltruckparts's Avatar
Diesel Bomber
Joined: Aug 2009
Posts: 2,124
Likes: 102
From: Lincoln, CA
Default

buy a complete truck dont try piecing it together. and make sure everything runs and works good before buying it. but no matter what way you look at it it isnt a cheap conversion in general.
 
The following users liked this post:
Moon (09-10-2010)
  #7  
Old 09-10-2010 | 11:59 AM
Moon's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 30
Likes: 0
Default

Originally Posted by tltruckparts
buy a complete truck dont try piecing it together. and make sure everything runs and works good before buying it. but no matter what way you look at it it isnt a cheap conversion in general.
So then in your case, why even do it. If you are buying a complete truck anyway that runs and works good? Why not just drive that dodge you bought instead of putting it in a chevy, that doesn't have a solid front axle?
 
  #8  
Old 09-10-2010 | 12:20 PM
NadirPoint's Avatar
Diesel Bomber
Joined: Aug 2009
Posts: 2,257
Likes: 186
From: CO
Default

Mechanically sound high-mileage worn out beater trucks (1st/2nd Gen Dodges) are available for alot less than a long block, even a used one.
 
The following users liked this post:
Moon (09-10-2010)
  #9  
Old 09-10-2010 | 01:18 PM
Moon's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 30
Likes: 0
Default

Here in Utah I use KSL.com classifieds to find stuff. Where do you guys from out of this area find your 1st/2nd gen Dodges?
 
  #10  
Old 09-10-2010 | 02:23 PM
tiremann9669's Avatar
Diesel Bomber
Joined: Mar 2010
Posts: 4,233
Likes: 434
From: Dansville NY
Default

Classifieds, Craigslist, ebay, drivin the back roads, they're out there, you just gotta be on the lookout for them
 


Quick Reply: Any of you willing to do a swap on my junk



All times are GMT -5. The time now is 06:01 PM.