03 sd 6.0 wont start
#42
ICP is injection control pressure sensor. It tells the ECM what the high pressure system is putting out. It could be a bad HPOP (high pressure oil pump) or IPR (injection pressure regulator) valve causing the bad ICP reading.
#44
I haven't worked on the 6.0. On the 7.3 all of the parts are on top of the engine but on the 6.0 from what I have heard the HPOP is inside somewhere so I don't know how hard that would be.
#46
The only aftermarket HPOP system I know of for a 6.0 is Bob @ Dieselsite's system. Think I may have heard of Elite diesel havin something too though.
And your HPOP is under the turbo, on the back passenger side of the engine, IIRC.
And your HPOP is under the turbo, on the back passenger side of the engine, IIRC.
#47
The HPOP is under the turbo, rear of the motor. You will need to pull the turbo to get to the cast iron cover, then pull the cover. There is a decent amount of labor involved, but by no means impossible for the shade tree mechanic.
PM on the way for the HPOP and all needed gaskets.
PM on the way for the HPOP and all needed gaskets.
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Accubuck
Diesel In Distress - Support Ticket
5
05-07-2015 04:46 PM
cjgregory
Diesel In Distress - Support Ticket
0
03-31-2015 01:45 PM
thumperf350
Ford Powerstroke 03-07 6.0L
4
01-08-2015 12:55 AM