03 sd 6.0 wont start
#21
01-05-2010, 07:39 PM
Join Date: Nov 2009
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
well pcm is in and a couple of squirts of starting fluid she fired right up and purred like a kitten. for fifteen minutes then inexplicably died now it wont start again 
#24
01-06-2010, 10:04 AM
Was the PCM programmed with the correct VIN? Usually a computer replacement requires a trip to the dealer on a flatbed for reprogramming.
#25
01-06-2010, 07:50 PM
Join Date: Nov 2009
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
the pcm i got came from a junkyard and it came out of a 6.no they ran the truck before pulling it. In short no i didnt have it reprogrammed. would that make a difference
#26
01-06-2010, 11:24 PM
Yes possibly, but I dunno if it woulda started.
Or, it would still start, but it would run like crap.
Not as 6.0 savy as I could be, but I'd get the VIN, pull the PCM and take it to a dealer, a tuner, etc...
Or, it would still start, but it would run like crap.
Not as 6.0 savy as I could be, but I'd get the VIN, pull the PCM and take it to a dealer, a tuner, etc...
