Respectfully, your experience in this matter is irrelevant as we are talking about Cummins 1st generation injectors. 1st gen injectors run at a substantially lower pop pressure as compared to '94 and up engines.

A very different beast.

Let's keep on the subject of 1st gen injectors folks.

 

Head dont take it personally as you dont knwo weston, he is a smart *** and knows his stuff.

The reason for taking as long as it has is he runs a shop, has many projects going on and injector results dont pop up overnight, his work is exceptional and worth the wait.

 

O what do you know? Just kiddin. Im just jealous. You made a hundred more horses then me at 4000 rpm's then I did at max power. Very cool.

I would like to see somebody run a big set of 5 hole sticks. My stock 4 x 12's run 300 through a stock auto so I bet a big set of 5 hole would be pretty good. Not sure if they would compete with the big 6'ers

 

FWIW, I was talking to member GLHS on DTR about his setup a month ago or so. I was looking to send my DDP's back to be made a little bigger (btw, they won't do that). He had a custom set of DDP injectors that he ran for quite awhile. He upgraded to 6 x 16's later, but he told me he ran his best 1/4 mile time with the DDP 5 hole injectors. That tells me 5 hole injectors can be competitive.


...and I was never being a dick about anything. My first post was very neutral. I was just making a statement.

 

I dont think he has made any injectors for any one making big power yet.

 

And GHLS is only making around 450HP, which for a 1st gen is great power, but we are talking big power here. 500+, that has not been done with a 5-hole injector yet. Been donee a few times with 6 holers though.

 

x2

 

i sent my injectors in just about 3 weeks ago im hoping theyre done soon. the part that worries me though is the guys at sdx havent returned any of my emails nor my phone calls, so im kinda startin to wonder what is goin on with my injectors. when you pay that kinda money for somethin a little update is nice

 

After doing some checking last night, looks like there is a bunch of misinformation on hole size on the 1st Gen injectors. Big power VE injectors, I could build somthing for someone, but I don't have time to chase someone down, I have a guy locally with a VE pulling truck that will go to a 5-hole next year from the 6/16's he has now.

 

How much power is he making with his pulling truck weston? I hope you nail this one... We need something to carry VE's to teh next level (700hp and forward)