24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

any ideas??

Thread Tools
 
Search this Thread
 
  #11  
Old 05-25-2012, 10:43 PM
James98&1/2's Avatar
Diesel Fan
Join Date: May 2007
Location: Thomasville
Posts: 13
Received 2 Likes on 2 Posts
Default

Sometimes it works, sometimes not. Could be a pump problem. Have you checked fuel pressure? Where is your lift pump located? In the tank or on the frame rail?
 
  #12  
Old 05-26-2012, 05:51 PM
twitchytuff's Avatar
Diesel Fan
Thread Starter
Join Date: May 2012
Location: sonora ca
Posts: 12
Received 0 Likes on 0 Posts
Default

its on the side of the bolck. i dont know wat my fule pressure is i dont have a guage or the tool to test it.
 
  #13  
Old 05-29-2012, 10:55 PM
twitchytuff's Avatar
Diesel Fan
Thread Starter
Join Date: May 2012
Location: sonora ca
Posts: 12
Received 0 Likes on 0 Posts
Default

well i just checked the apps with a volt meter and it was reading 2.42 and the whit sticker on the back says it should b at .568 could that b the issue?
 
  #14  
Old 05-30-2012, 01:35 AM
01quadcab's Avatar
Diesel Bomber
Join Date: Jun 2007
Location: Shingletown ca
Posts: 2,664
Received 153 Likes on 136 Posts
Default

your truck could be starting in 2nd too you could have a valve body issue or your tv cable is too tight. try pulling it into 1st and see what happens.
 
  #15  
Old 06-10-2012, 05:44 PM
twitchytuff's Avatar
Diesel Fan
Thread Starter
Join Date: May 2012
Location: sonora ca
Posts: 12
Received 0 Likes on 0 Posts
Default

i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code
 
  #16  
Old 06-13-2012, 10:05 AM
Join Date: Jun 2012
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default smoke

hey guys i have a 1999 Dodge 3/4 ton 2wheel drive it has a five speed in it and i was wondering if i was to put a diablo sport puck on my truck if it would make it smoke more or does anyone have any ideas hel plz.

---AutoMerged DoublePost---

is there anyway to build more boost on a 1999 24 valve
 

Last edited by mind if i smoke24; 06-13-2012 at 10:05 AM. Reason: Automerged Doublepost
  #17  
Old 06-14-2012, 02:55 AM
Baradium's Avatar
Diesel Fan
Join Date: Jun 2012
Location: Alaska
Posts: 95
Likes: 0
Received 10 Likes on 10 Posts
Default

Originally Posted by twitchytuff
i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code
Did you do it with the key on or off? It needs to be set with the key on. That 2.5 sounds like the reading I showed with my key off is the reason I ask, so if you did that you could have set it too low.
 
  #18  
Old 06-15-2012, 01:19 AM
twitchytuff's Avatar
Diesel Fan
Thread Starter
Join Date: May 2012
Location: sonora ca
Posts: 12
Received 0 Likes on 0 Posts
Default

i did it with the key on.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
363coupe
Ford Powerstroke 03-07 6.0L
1
11-04-2015 09:41 AM
Boatman
12 Valve 2nd Gen Dodge Cummins 94-98
1
03-20-2015 10:00 AM
Duramax2323
Chevy/GMC Duramax 01-04 LB7
6
03-09-2015 04:34 PM
UniqueCopy
Ford Powerstroke 94-98 7.3L
2
12-14-2014 11:37 AM
txbiker
Jeep Liberty
1
10-27-2014 10:36 AM



Quick Reply: any ideas??



All times are GMT -5. The time now is 05:34 AM.