24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

any ideas??

Old May 25, 2012 | 10:43 PM
  #11  
James98&1/2's Avatar
Diesel Fan
Joined: May 2007
Posts: 13
Likes: 2
From: Thomasville
Default

Sometimes it works, sometimes not. Could be a pump problem. Have you checked fuel pressure? Where is your lift pump located? In the tank or on the frame rail?
 
Reply
Old May 26, 2012 | 05:51 PM
  #12  
twitchytuff's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2012
Posts: 12
Likes: 0
From: sonora ca
Default

its on the side of the bolck. i dont know wat my fule pressure is i dont have a guage or the tool to test it.
 
Reply
Old May 29, 2012 | 10:55 PM
  #13  
twitchytuff's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2012
Posts: 12
Likes: 0
From: sonora ca
Default

well i just checked the apps with a volt meter and it was reading 2.42 and the whit sticker on the back says it should b at .568 could that b the issue?
 
Reply
Old May 30, 2012 | 01:35 AM
  #14  
01quadcab's Avatar
Diesel Bomber
Joined: Jun 2007
Posts: 2,664
Likes: 153
From: Shingletown ca
Default

your truck could be starting in 2nd too you could have a valve body issue or your tv cable is too tight. try pulling it into 1st and see what happens.
 
Reply
Old Jun 10, 2012 | 05:44 PM
  #15  
twitchytuff's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2012
Posts: 12
Likes: 0
From: sonora ca
Default

i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code
 
Reply
Old Jun 13, 2012 | 10:05 AM
  #16  
mind if i smoke24's Avatar
Joined: Jun 2012
Posts: 1
Likes: 0
Default smoke

hey guys i have a 1999 Dodge 3/4 ton 2wheel drive it has a five speed in it and i was wondering if i was to put a diablo sport puck on my truck if it would make it smoke more or does anyone have any ideas hel plz.

---AutoMerged DoublePost---

is there anyway to build more boost on a 1999 24 valve
 

Last edited by mind if i smoke24; Jun 13, 2012 at 10:05 AM. Reason: Automerged Doublepost
Reply
Old Jun 14, 2012 | 02:55 AM
  #17  
Baradium's Avatar
Diesel Fan
Joined: Jun 2012
Posts: 96
Likes: 11
From: Alaska
Default

Originally Posted by twitchytuff
i finaly got my truck to throw sum codes for me doin the key on-off-on-off-on and i got a 1693 pcm, 1698 ecm, and a 0122, i found sume codes on line and the 0122 is the apps volt is to low. i set it from 2.5 down to .586 like the sticker on the back said. could i need a new apps? and i also found out that the 1693 said generic fault in the bus or pcm/ecm interface. idk wat the pcm or ecm r. any ideas on where i should go from there? i couldnt find 1698 code
Did you do it with the key on or off? It needs to be set with the key on. That 2.5 sounds like the reading I showed with my key off is the reason I ask, so if you did that you could have set it too low.
 
Reply
Old Jun 15, 2012 | 01:19 AM
  #18  
twitchytuff's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2012
Posts: 12
Likes: 0
From: sonora ca
Default

i did it with the key on.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
363coupe
Ford Powerstroke 03-07 6.0L
1
Nov 4, 2015 09:41 AM
Boatman
12 Valve 2nd Gen Dodge Cummins 94-98
1
Mar 20, 2015 10:00 AM
Duramax2323
Chevy/GMC Duramax 01-04 LB7
6
Mar 9, 2015 04:34 PM
UniqueCopy
Ford Powerstroke 94-98 7.3L
2
Dec 14, 2014 11:37 AM
txbiker
Jeep Liberty
1
Oct 27, 2014 10:36 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:52 AM.