Auto to manual conversion
#21
I just swapped in a 6spd. out of a 01 h.o. to my 98.5 and I was looking for someone that could either flash my ecm and get this thing to work right or if soemone has a ecm outta a manual they wanna ditch let me know. for some reason when i did the swap i lost my cruise (obviously), the lights in the dash flash and it'll ding all the time, these things didn't suprise me but the one that did suprise me is that for some reason I lost all my heater and a/c power to the switch, I'm guessing this came form a communications error between the ecm and pcm but who knows, i have checked all my connections, fuses, and wires and everything is good even the ballast resistor in the heater housing. any ideas? thanks
Oh one last thing is that mine when I did the swap took a 3/4'' spacer off of the 01 h.o. that fits between my starter and my bellhousing in order to keep my starter far enough away from the flywheel so it doesn't hit it while the engine is running.
Oh one last thing is that mine when I did the swap took a 3/4'' spacer off of the 01 h.o. that fits between my starter and my bellhousing in order to keep my starter far enough away from the flywheel so it doesn't hit it while the engine is running.
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
11-11-2015 10:03 AM