Project Resurection P-Pump
#72
#74
Time to build the suspension blocks. I was going for easy adjustment since the truck will be driven to the pulls as of for now. (Need to buy a goosenesck )
Mock up with 2x2 1/8" wall squar tube for upper and 2.5 for lower and 1/8" plate
Welded up
7/8" hardened pins
In the up positon for goin down the road
Showing the down position, but cant drill the holes yet since I dont have the bed on yet to get the final ride height since we have a 1" rule here
Mock up with 2x2 1/8" wall squar tube for upper and 2.5 for lower and 1/8" plate
Welded up
7/8" hardened pins
In the up positon for goin down the road
Showing the down position, but cant drill the holes yet since I dont have the bed on yet to get the final ride height since we have a 1" rule here
Last edited by Red_Rattler; 06-17-2010 at 09:48 PM.
#75
#76
#78
#79