help!!!! 7.3 wont start
I have 2001 f350 with the 7.3l. I bought this truck non-running. The guy said "It was running and died, I found out that my boy ran it out of fuel. but still wont start."
okay, so here is the symptoms:
-turns over but wont start
-no wait to start light
-no tach bounce
-no white smoke for exhaust
-when opening fuel valve (on filter) it shoots fuel out with pressure no air.
things I've done:
-checked fuel cut off switch on passenger kick panel
- replaced cam shaft sensor
-replaced icp (had oil in it) (6v at power connector)
-put in 15gal of fuel
same problems exist.
I ordered one of those $10 dongles from ebay I saw on youtube video. wont be here till wed.....
is there other things I can check
so far I have:
irp (which looked new, so I didn't remove yet)
#30 fuse in cab and #22 under hood (looked already and didn't see any blown..)
I don't know how to check the idc.. or the pcu in it. (sorry if wrong acronyms)
or how to check for leaks with shop air...
okay, so here is the symptoms:
-turns over but wont start
-no wait to start light
-no tach bounce
-no white smoke for exhaust
-when opening fuel valve (on filter) it shoots fuel out with pressure no air.
things I've done:
-checked fuel cut off switch on passenger kick panel
- replaced cam shaft sensor
-replaced icp (had oil in it) (6v at power connector)
-put in 15gal of fuel
same problems exist.
I ordered one of those $10 dongles from ebay I saw on youtube video. wont be here till wed.....
is there other things I can check
so far I have:
irp (which looked new, so I didn't remove yet)
#30 fuse in cab and #22 under hood (looked already and didn't see any blown..)
I don't know how to check the idc.. or the pcu in it. (sorry if wrong acronyms)
or how to check for leaks with shop air...
but I replaced it. by the Harmonic balancer... I could have got a bad one out of the box. but I looked at my friends ( 2 different ones) 2000 and they didn't bounce either when starting...
okay update:
still waiting on a reader to check everything.
I rebuilt the ipr so its clean and filled the hpop resev. full
also replaced both batteries
still no white smoke or start
still waiting on a reader to check everything.
I rebuilt the ipr so its clean and filled the hpop resev. full
also replaced both batteries
still no white smoke or start
okay guys got it running. I put new battery terminals on it and after a few gas soaked rags, I got it running! I guess the heads were bone dry... It still smokes white when running, but I put some fuel dispersment/water remover and it now clears up after it warms.
Maybe glow plugs?
Maybe glow plugs?
Thread
Thread Starter
Forum
Replies
Last Post
Bigredpowerstroke
Ford Powerstroke 94-98 7.3L
2
Aug 14, 2015 10:31 AM
Domrig13
General Diesel Related
0
Dec 12, 2014 01:24 PM



