i bought my truck which had already been converted to a manuel. it had a single mass flywheel installed. It was slipping when i pulled my trailer. So i had a new SB clutch installed. It was making some noise when i would idle around, but nothing to bad. Now it sounds like the truck is going to come apart, especially when im at highway speed "75" and let my foot out of the peddle just a little and it growls and vibrates real bad.
I contacted the installer and he says thats normal for a single mass flywheel. Well thats what it had in it before and it wasn't that bad.
what can i do? Any input would be helpful.

 

So i guess this was a waist of my time.

 

i used to run a South bend in my old powerstroke and it was a great clutch but it was noisy, especially at idle. mine was a con O

 

dont know what clutch is in my pickup but it makes noise. pretty sure its my throw out bearing going out.

 

single mass fly wheels make noise, alot of people complain about it.

most of the obs guys (including myself) with a single mass add an extra quart of trans fluid to take care of the noise problem

 

im pretty sure thats normal to hear sounds.my brother just replaced everything clutch,dualmass with single mass,fork,t.o.b , ect it still makes a sound.it is from south bend.

 

I have a single mass in my truck and it was a duel No Noise I did replace the clutch and had the fly wheel resurfaced the main thing new piolet and throw our bearings if you do not replace these items you are asking for trouble good luck I would start their.