Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

97 psd engine idle and boost

Thread Tools
 
Search this Thread
 
  #1  
Old 02-03-2010, 08:34 AM
soco34's Avatar
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 97 psd engine idle and boost

Hello- I am new to this forum and was hoping to get some thoughts on my engine issues. I have a 97 psd with 173,000 miles, 5 spd manual , 4wd. I have had it for about 2 years ,approx. 10,000 miles. It is basically stock but has an aftermarket exhaust ? and temp/boost gauges. On the first start up of the day it starts no problem and about 30 seconds later it starts to surge for about a minute and then idles smooth. When I start down the road it seems like there is not much acceleration, it seems really sluggish. The boost gauge does not show much . In 1st 2nd or 3rd I get 0-5 psi, I am barely getting 10 psi at 2500-2800 rpms in 4th or 5th gears. My mpg is about 12-13. Thanks for any help .
 
  #2  
Old 02-03-2010, 09:29 AM
PSD's Avatar
PSD
PSD is offline
Diesel Enthusiast
Join Date: Aug 2009
Location: Wisconsin
Posts: 333
Received 6 Likes on 5 Posts
Default

Exhaust back pressure valve. Id leave you more to work with but I am in school.
Someone will chime in and help ya soon or you can do some research on the EBPV
Not harmful or anything to worry about.
 
  #3  
Old 02-04-2010, 06:02 PM
soco34's Avatar
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the input. I looked around for info on the ebpv and figured I might try unplugging the sensor. On the first start today I still had some surge after about 20-30 seconds, the lights dim and the volt gauge moves fromthe middle to the right about a quarter inch and back, rpms go from about 1500 up to about 1700 and back. After about 45-60 seconds the surge stopped. The gauge stayed to the right and the rpms stayed at about 1700. Acceleration did not seem as sluggish and the amount of boost was the same .
 
  #4  
Old 02-05-2010, 07:54 AM
DieselDanBoy's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Torrington CT
Posts: 574
Received 28 Likes on 28 Posts
Default

disconnect the ebpv, there's a 2 pin connector on the intake side of the turbo, towards the bottom. that should take care of your boost issue and possibly the surging, if not, look at your ICP sensor.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
Chris Herron
12 Valve 2nd Gen Dodge Cummins 94-98
14
09-12-2015 08:42 AM
mech915
Ford Truck and Powerstroke Turbo Diesel Forum
0
08-17-2015 11:15 PM
ryank 199
Diesel In Distress - Support Ticket
1
05-14-2015 06:41 PM
99stackedpowerstroke
Ford Powerstroke 03-07 6.0L
7
10-08-2014 07:06 PM



Quick Reply: 97 psd engine idle and boost



All times are GMT -5. The time now is 07:07 PM.