starting trouble
It's not difficult. Are you doing this yourself? Make sure you have a comfortable blanket to lay on the engine cause you'll need to lay on top of it to work back there, and make sure you have a good combination of extensions and swivel sockets because those turbo bolts can be a PITA to get at. Once you find them it's just a matter of having the right combo of swivel/extensions and it's out. Not too difficult at all on these actually.
i dont know if we will yet. my dad decided to try to change the fuel/oil filters first. so we will see where that goes. we changed one and it was pretty crappy and beat up still workin on the other one
---AutoMerged DoublePost---
alright well the fuel filters didnt work and now when you try and start it it says tbc fault on the display deal
---AutoMerged DoublePost---
alright well the fuel filters didnt work and now when you try and start it it says tbc fault on the display deal
Last edited by Ktm117; Jan 25, 2011 at 06:48 PM. Reason: Automerged Doublepost
TBC is the trailer brake controller
It means either A you have a bad ground on your trailer. Or B your cable on your trailer is too short and causing it to pull out of the plug or C you have a short in the factory trailer harness wiring or the plug is gunked up
It means either A you have a bad ground on your trailer. Or B your cable on your trailer is too short and causing it to pull out of the plug or C you have a short in the factory trailer harness wiring or the plug is gunked up
Thread
Thread Starter
Forum
Replies
Last Post
GasItOut
12 Valve 2nd Gen Dodge Cummins 94-98
35
Jul 22, 2015 01:11 PM
hurriedcoyte
Diesel In Distress - Support Ticket
3
Jun 19, 2015 06:26 AM
Blackdog15
12 Valve 2nd Gen Dodge Cummins 94-98
3
May 20, 2015 10:49 PM




