2005 Super duty no boost idles fine no power
#1
2005 Super duty no boost idles fine no power
Hello I’m new here I have a 2005 super duty 6.0 all of a sudden I had no boost no power , this is what I have done , changed map sensor checked hose to map sensor , new EGR , new fuel filters , new air filters , cleaned EBP sensor and tube , checked tubes and boots , still have same problem no boost no power , idles great , when trying to drive it I get a terrible hot smell like plugged cat would do , but cat not plugged . Cannot hear turbo spooling, any help would be greatly appreciated.
#3
Checked turbo plug
Hello thanks for replying, I checked the plug to turbo seloniod . Haven’t had turbo out truck has 130,000 miles on it always ran great , the codes I am getting is low turbo boost , low map sensor correlation, 0299 , 0069 and for some reason 1,3,7 glow plug issue I changed glow plugs and harness last summer along with glow plug module,
#4
Pull the MAP sensor hose see if its leaking or plugged up with carbon. Check the nipple on the intake to see if it is plugged.
Post MAP, Baro, and EBP readings at KOEO.
For the P0299 - post the VGT % duty cycle value (commanded value - not an actual valve position) at cold idle, hot idle, highway speed (cruise), and on acceleration.
Post MAP, Baro, and EBP readings at KOEO.
For the P0299 - post the VGT % duty cycle value (commanded value - not an actual valve position) at cold idle, hot idle, highway speed (cruise), and on acceleration.
Thread
Thread Starter
Forum
Replies
Last Post
mech915
Ford Truck and Powerstroke Turbo Diesel Forum
0
08-17-2015 11:15 PM