Turn Up An Injection Pump On An 84 6.9 Diesel
#31
#32
#33
#35
"THEY" would be the guys who cant aford a turbo and if you must turn up your pump, there is a little triangle plate low on the pass side of the ip remove two small screws turn motor over till you can see an allan haed using an allan wrench turn clockwise one flat "flat" meaning one side or flat of the allan wrench if your pump is stock and nobody has messed with it you should be able to go two flats before you have to start streesing egt's (exhaust gas temps) stock on an incline these motors run close to 1200deg aluminum melts at 1400 deg not much room.......goodluck...
#37
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM
Mac1997
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
07-13-2015 05:08 AM