Ford 83-94 6.9 and 7.3L General Discussion of 83-94 6.9 and 7.3 Liter Ford Diesels

My 93 rough starts and smoke

Thread Tools
 
Search this Thread
 
  #1  
Old 09-01-2014, 10:13 PM
hawkrod's Avatar
Newbie
Thread Starter
Join Date: Sep 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default My 93 rough starts and smoke

Hi, my 93 7.3 N/A is being strange, when I first start it up cold it runs rough and misses and smokes bluish white smoke, it eventually levels out when the truck warms up. And now its even still smoking at idle.it doesnt burn coolant or oil. I was told that thr advance inside the pump was bad and I could use addictive to add lubcritcity to help but id end up needed a new pump eventually. My temperate sensor gauge doesnt get in thr normal range so I was wondering if the electronic cold start advance was an issue. The truck has new fuel return lines kit and lift pump. Also the fuel tank started leaking pretty bad. Just wondering he anybody could give me some advice
 
  #2  
Old 09-04-2014, 11:14 AM
4x4manonbroke's Avatar
Diesel Bomber
Join Date: Jun 2010
Location: Tacoma
Posts: 3,202
Received 142 Likes on 136 Posts
Default

fuel filter .. does yours still have the plastic bowl on the bottom ?

If so .. go to your local parts store and use the exchange number ( BF-1222.. Baldwin #) It will inter change with Wix, Napa, Etc ..

keep us posted..
 
  #3  
Old 09-07-2014, 10:42 PM
hawkrod's Avatar
Newbie
Thread Starter
Join Date: Sep 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Thabks man and yes I do use a cup less filter. I got a pump rebuilt and am picking it up once I get the old one out. Ill keep you guys posted.
 
  #4  
Old 09-07-2014, 11:10 PM
4x4manonbroke's Avatar
Diesel Bomber
Join Date: Jun 2010
Location: Tacoma
Posts: 3,202
Received 142 Likes on 136 Posts
Default

I think that your gonna find that your supply lines to the Lift pump may be the issue .. also there is a small bushing on the IP where the lines comes into the IP that can fail and cause the IP to suck air ..
 
  #5  
Old 09-07-2014, 11:12 PM
hawkrod's Avatar
Newbie
Thread Starter
Join Date: Sep 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Has a new lift pump, where is this bushing?
 
  #6  
Old 09-08-2014, 11:28 AM
4x4manonbroke's Avatar
Diesel Bomber
Join Date: Jun 2010
Location: Tacoma
Posts: 3,202
Received 142 Likes on 136 Posts
Default

the bushing is @ the IP .. if you were to loosen the supplu line from the Filter housing @ lift IP .. its under that brass nut .. its like plastic/rubber .. if its all mushey .. it can suck air there too .. I had to replace the entire line with a SS braided supply line .. Never ran better than that ..
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mattshow123
12 Valve 2nd Gen Dodge Cummins 94-98
14
03-12-2018 01:41 PM
coolf250
Ford Powerstroke 03-07 6.0L
1
12-02-2017 12:30 PM
sandlappa
Ford Powerstroke 99-03 7.3L
4
08-23-2015 09:20 PM
Timglow546
Ford Powerstroke 03-07 6.0L
8
06-03-2015 10:13 PM
scottxmorris
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
04-20-2015 08:16 AM



Quick Reply: My 93 rough starts and smoke



All times are GMT -5. The time now is 02:43 AM.