injector pump problem
#1
injector pump problem
Hey guys I have a 1986 Ford f250 6.9 diesel. I put a new tank new fuel lines new sending unit and a new fuel pump with to new batteries. I purged all the fuel lines all the way to the injector pump but when I cracked the lines on the injectors to bleed the injectors I couldn't get any fuel through those lines. I know the truck will start though because when I put some diesel in the intake it tries to start i also checked to make sure i had electricity to the pump with a test light and I have power. I know i don't have working glow plugs but I heard of those trucks starting with out glow plugs. Could this mean I have a bad injector pump or could there be something else wrong?
#5
I would start with getting rid of the Fuel bowl fuel filter to start with ... I use a BF-1222 baldwin filter .. Wix makes one that can be cross referenced with the BF-1222 #'s...
If nothing changes, start checking fuel lines and such .. might go ahead and swap out the Lift pump ... Not real hard to do ...
Keep us posted ..
If nothing changes, start checking fuel lines and such .. might go ahead and swap out the Lift pump ... Not real hard to do ...
Keep us posted ..
#10
The following users liked this post:
powerstrokin350 (08-29-2014)
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
09-14-2015 06:34 PM
thurobred1320
12 Valve 2nd Gen Dodge Cummins 94-98
2
05-05-2015 09:26 PM