hard cold start on 7.3 idi
#2
#3
Thanks for the advise.I will give it a shot.
---AutoMerged DoublePost---
i didnt mention if i plug it in it starts right up.i have AC glow plugs in it and i have noticed a few postings that say use only MotorCraft
---AutoMerged DoublePost---
i didnt mention if i plug it in it starts right up.i have AC glow plugs in it and i have noticed a few postings that say use only MotorCraft
Last edited by Timhill442; 11-16-2013 at 01:21 PM. Reason: Automerged Doublepost
#4
My truck had the same issue, and I use autolite plugs, after about 200 cold starts I pulled my plugs, and inspected along with test. No swelling in them what-so-ever. And tested out perfect, put them back in and had the same problem. Changed out my return lines, fittings and orings, then replaced my fuel filter with a single piece to get rid of the dual piece with the separator and viola no more cold start issue haha Took about half a crank in the morning to start up until my IP took a s**t on me about a month ago, now I'm fixing everything that I need on it while I pile up all the parts I want.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Bigredpowerstroke
Ford Powerstroke 94-98 7.3L
2
08-14-2015 10:31 AM
g.logistics
Ford 83-94 6.9 and 7.3L General
9
11-22-2014 08:54 AM