my first 12v conversion
#4
#8
I need some help?????????? I have a divorced transfer case in my burb. it has the small yoke.. but the trans on the cummins as the big yoke can i buy a big one to go on my tranfer case????? Do they make a slip yoke that fits the trans that is small to match the transfer case
Last edited by bigford2000; 11-06-2010 at 05:12 PM. Reason: Automerged Doublepost
#10
Im no expert eather but i believe they stopped that in the late 60's. most auto companies didnt make there own 4x4's then. like dana would just ad a transfer case and a frontend. I also believe you can take off that front piece on the case and locate an adapter and sleave and bolt it to your 518a. now that beeing said, that is an 86 and you do have a 518a trany 4x4 in cummins. I took the input shaft out and swaped it into the chevy 205 case and the out put YOLK INTERCHANGES ALSO. I couldnt find a larger yolk eather so if you do let me know. some of those divorced t-cases were dana 30 (i think) (30 or 35) if so im not sure those are interchangable. sorry about the jiberish Shane