my first 12v conversion
#21
02-24-2011, 06:29 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#22
02-24-2011, 06:33 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#23
02-28-2011, 07:08 PM
Diesel Enthusiast
Your divorced transfercase is it a np205 if so u can get the 1410 yoke for the front shaft it's the same as the rear on a np205 that's what I did. on a divorce np205 the input and out put shafts are both 31 spline if u look on my build under cummins 5.9 in a blazer u will see a pic I will get u the part number tomorrow it's made by spicer
---AutoMerged DoublePost---
I found that part number spicer part number is 300483 hope this helps u find what u want
---AutoMerged DoublePost---
I found that part number spicer part number is 300483 hope this helps u find what u want
Last edited by cumminsblazer; 02-28-2011 at 07:08 PM. Reason: Automerged Doublepost
#24
03-01-2011, 04:24 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#25
03-05-2011, 07:03 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#26
03-05-2011, 07:11 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#27
03-05-2011, 07:19 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#28
03-06-2011, 12:24 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#29
03-06-2011, 09:28 PM
Join Date: Oct 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
