Replaced head gasket, Now weird squeel
#11
06-03-2010, 05:43 PM
Diesel Bomber
I'm not a 12V guy, but aren't the injector tubes on the driver's side? that water or whatever it was came from the passenger side of the motor.
#12
06-03-2010, 06:22 PM
The tubes run from the pump across the top of the engine to the passenger side. The injectors are on the side of the head right above the exhaust manifold
#13
06-04-2010, 07:43 AM
Diesel Enthusiast
Yeah it kinda sounds like a compression leak to me. I know that i can hear the injector line cracked loose too but I def sounds like there is a leak. Otherwise it sounds fine to me
#14
06-04-2010, 08:46 AM
So my valves were way to tight! I bent a couple pushrods so I bit the bullet and had a set of billit chromoly hd pushrods overnighted, so I'll get those on this afternoon and go from there. Thanks for the help guys
let us know how it works out
#16
06-04-2010, 04:43 PM
Got my new rods in, it started right up 
It had a little knock to it now, so I need to go in and do a valve adjustment and I bet it'll start right back up again. Thanks for the help!!!
It had a little knock to it now, so I need to go in and do a valve adjustment and I bet it'll start right back up again. Thanks for the help!!!
Thread
Thread Starter
Forum
Replies
Last Post
