Code P0216
#12
I had the same code I bought a new pmd from accurate diesel it was expensive but truck runs great!! I have a #9 resistor fsd heat sync all together shipping and 6' harness 419$ but like I said it runs so smooth you wouldn't believe the weird thing a bad pmd could do also another thing you could check is the harness on top of the intake behind your fuel filter housing it's a really big square harness it's known to build a lot of corrosion
#14
K getting code p0216 i know it has to with timing so what have done
change out the stepper motor and ran some cleaner thought a tank fuel
clean and check all grounds
check lift pump good
replace fuel filter
even swap out PMD with 3 diff ones
truck seem run great going down the road at any speed but in the driveway in park if take rpms 2000 it ok and if take it to 2200 - 2300 its get ruff and lot white smoke now have clear the code and go down road 25 to 100 miles no light comes on but next time start it it will come back on and clear agian go 10 miles down the road and come back on. but like i said it run great with os with out ses light
thanks for any help
Bruce
change out the stepper motor and ran some cleaner thought a tank fuel
clean and check all grounds
check lift pump good
replace fuel filter
even swap out PMD with 3 diff ones
truck seem run great going down the road at any speed but in the driveway in park if take rpms 2000 it ok and if take it to 2200 - 2300 its get ruff and lot white smoke now have clear the code and go down road 25 to 100 miles no light comes on but next time start it it will come back on and clear agian go 10 miles down the road and come back on. but like i said it run great with os with out ses light
thanks for any help
Bruce
Thread
Thread Starter
Forum
Replies
Last Post