"The" 2 Stroke Oil Thread
#131
I don't know that any additive will help when it's THAT cold. Personally I'm looking into fuel tank heaters this winter for my truck. The only issue is that they're all designed for aluminum tanks and pickups use plastic, so it could create an issue with heat and structural integrity. Also mounting it might be tricky. But I definitely want to get a fuel tank heater. Less winter additive + Warmer fuel = a better running truck.
The following users liked this post:
North Pole Hooker (08-25-2009)
#132
Here's a thought... we put dual plug in pad heaters on our oil pans, singles on our trannies and diffs, and have battery blankets (AC powered / plug in). Maybe a DC powered pad could be placed / adhered to the bottom / sides of the fuel tank. Maybe a couple, you have a really big tank at 56 gallons. I have a 2000 Watt inverter installed on mine, maybe an AC heater pad hooked into that, if you want to install an inverter.
Yeah, -60 is tough on EVERYTHING. If your truck gets cold soaked at that temp, you can jump in the drivers seat and actually crack / break the leather. I tried to close the last flap on my radiator cover after driving 25 minutes into work, and in just that short amount of time the fabric got so cold and stiff that I broke it in two when I tried to close it. And that's after keeping it in the garage all night before leaving for work. The parasitic drag on the front diff is so great after a day at work that you have to put the truck in 4 wheel drive or your rear tires will spin on level ground while your fronts will drag just from the diff fluid being so cold. I use full synthethic and have the problem. My boss uses Ams-Oil and has the same problem. Only a heating pad on the diff will fix it. Lift the hood on our trucks and you will notice a power-strip slammed full of plugs that go to all of our various heating pads with a single cord hanging out the grill like a tongue. We have no parking meters up here, everything is a post in the ground with outlets attached to it, lining the streets. It's either that or keep it running while you shop, which most people do, anyway. Still, I wouldn't change it for the World!
Yeah, -60 is tough on EVERYTHING. If your truck gets cold soaked at that temp, you can jump in the drivers seat and actually crack / break the leather. I tried to close the last flap on my radiator cover after driving 25 minutes into work, and in just that short amount of time the fabric got so cold and stiff that I broke it in two when I tried to close it. And that's after keeping it in the garage all night before leaving for work. The parasitic drag on the front diff is so great after a day at work that you have to put the truck in 4 wheel drive or your rear tires will spin on level ground while your fronts will drag just from the diff fluid being so cold. I use full synthethic and have the problem. My boss uses Ams-Oil and has the same problem. Only a heating pad on the diff will fix it. Lift the hood on our trucks and you will notice a power-strip slammed full of plugs that go to all of our various heating pads with a single cord hanging out the grill like a tongue. We have no parking meters up here, everything is a post in the ground with outlets attached to it, lining the streets. It's either that or keep it running while you shop, which most people do, anyway. Still, I wouldn't change it for the World!
#133
The following users liked this post:
North Pole Hooker (08-27-2009)
#134
Join Date: Dec 2008
Location: "The Peoples Republic of Illinois".....behind enemy lines
Posts: 61
Likes: 0
Received 6 Likes
on
5 Posts
I don't run a FARS or AirHog; however, I've been running a GDP Walbro lift pump system for almost the same amount of time I've been using 2 stroke oil as a diesel additive. NPH, I don't know of anything diesel additive that will help down to -60+. I'll bet if you pee outside, the stream freezes before is hits the ground!!!!! The only way I know of is what has been posted already........fuel tank heaters etc. Even at that cold, you'll still have to almost totally insulate the engine compartment and fuel lines from the cold. Even at -20 here, it still takes almost 10 miles for my truck to get to operating temps with my home made cold front!!!
The following users liked this post:
North Pole Hooker (08-27-2009)
#135
The following users liked this post:
North Pole Hooker (08-27-2009)
#137
Join Date: Dec 2008
Location: "The Peoples Republic of Illinois".....behind enemy lines
Posts: 61
Likes: 0
Received 6 Likes
on
5 Posts
The following users liked this post:
North Pole Hooker (08-30-2009)
#138
The following users liked this post:
North Pole Hooker (08-30-2009)
#139
Theres nothing wrong with a gas vehicle. Both of my trucks are diesel - but when the weather turns cold it doesnt take long for my thoughts to wander and think about getting a gas vehicle. Diesels are a purposed built vehicle and they have their place but for a daily driver - gas powered vehicles just make more sense for most people. These trucks arent cheap or easy to maintain either.
The following 2 users liked this post by Dr. Evil:
logger (12-24-2011),
North Pole Hooker (08-30-2009)
#140
Theres nothing wrong with a gas vehicle. Both of my trucks are diesel - but when the weather turns cold it doesnt take long for my thoughts to wander and think about getting a gas vehicle. Diesels are a purposed built vehicle and they have their place but for a daily driver - gas powered vehicles just make more sense for most people. These trucks arent cheap or easy to maintain either.
I know it will be expensive, at first. But someday it WILL be cheap and easy. Trust me, I'm a Hooker. If there's one thing I know it's "cheap and easy"!