Best intake for a 6.0
#11
#12
They're no trouble at all to change.
Take the degas hose off that goes from the rad to the degas bottle. Undo the clamp from the turbo inlet tube at the end of the tube that comes from the air filter housing. Pull it back and yank the whole works out as one piece. Change the filter, and reassemble as necessary. I can do it in under 6 minutes. (one tenth on the punchclock at work).
Don't forget to pull the filter minder out as well as unplug the MAF sensor if equipped.
Take the degas hose off that goes from the rad to the degas bottle. Undo the clamp from the turbo inlet tube at the end of the tube that comes from the air filter housing. Pull it back and yank the whole works out as one piece. Change the filter, and reassemble as necessary. I can do it in under 6 minutes. (one tenth on the punchclock at work).
Don't forget to pull the filter minder out as well as unplug the MAF sensor if equipped.
#14
#15
The following users liked this post:
Big Angry Hillbilly (04-12-2009)
#19
#20