Stock turbo over anything is very restrictive. Even with a huge external gate, there's only so much you can do with this setup.

I would not go bigger than a 100HP injector with an adjustable box like a Comp or Juice. You will be at the limits of flow for drive pressures.

Skip the K31. It's better suited to a 64 sized top charger. Same thing with the GT4202. I prefer the S400 setup as the piping is cleaner.

Dave

 

K31 with a 62 works great for towing.

 

IMO,

not the best setup to be sure. Runs out of breath very early and on many trucks doing a tough pull, it's right in the RPM range that it's needed most. Most commonly, the 62 begins to over-compound and EGTs skyrocket.

This is not always the case. For small injector trucks, it works fine. But if they just want a really good solid towing set, it's hard to beat BD's twins to 450-500HP.

Again, JMO.

Dave

 

This is my daily driver so I am not looking to get any more than 400hp out of my truck. What I would like to do is lower my current EGTs on a good grade and have a little more power out my truck while pulling a heavy load. I am in the Military and living in Southern California so I need to keep my upgrade in the affordable section. I do not have the ability to afford the $4k plus for the BD twins and the parts required to use them anytime in the next year or so. What would you suggest with my limits in place?

 

I would say a great way to lower your current egt's is to get a better set of injectors. Is your dyno numbers with the jammers? If so you might have an issue there. I made 319 with my edge juice with attitude, and 354 with a set of industrial 24v injectors. With those injectors my egt's were much lower and drove well. A quality set of injectors goes a long way.

 

Funny how the 62/k31 Industrial Injection Towing Twin setup is rated at 350-700hp.

 

 

Yes my number were with the current setup on my signature to include the jammers. My next investment is a set of injectors. I just need to make a decision on what size I need to run a set of twins. I don't want to have to buy them twice.

---AutoMerged DoublePost---

This setup and the BD twins are way out of my current price range. I apprecate that you two are try to get me the best possible setup. Please remember I still have to get head studs and injectors to go along with twins.

 

look into a set of industrial or ddp injectors they make great injectors. Im goin up to ddp 150's this summer.

 

I am going to get a set of DDPs. Just working on the size to match up with a set of twins.