edge comp drag box

Reply Subscribe

Thread Tools

Search this Thread

Jan 22, 2010 | 05:51 PM

jack34

Thread Starter

Newbie

Joined: Jan 2010

Posts: 2

Likes: 0

edge comp drag box

i have a edge comp drag box with stock set up what needs to be done? to support this

Jan 22, 2010 | 05:53 PM

Dr. Evil

BOMBARDIER

Joined: Mar 2007

Posts: 23,293

Likes: 1,322

From: North of You

Please post in the correct forum.

Welcome.

Jan 22, 2010 | 05:58 PM

jack34

Thread Starter

Newbie

Joined: Jan 2010

Posts: 2

Likes: 0

i dont know how

Jan 22, 2010 | 06:44 PM

0Codgedodger

FormerVendor

Joined: Nov 2009

Posts: 387

Likes: 20

From: North Vernon, IN

I dont fully understand what your asking...

Last edited by Codgedodger; Jan 22, 2010 at 06:47 PM.

Jan 23, 2010 | 05:22 AM

redneck_cummins

Diesel Enthusiast

Joined: Dec 2008

Posts: 180

Likes: 4

From: Abingdon, Va

Need to get gauges fuel pressure(TOP PRIORITY), boost, and egt), better fuel system airdog or fass, and then a better clutch. That should about do it. Good luck and welcome to the site

Jan 23, 2010 | 06:36 AM

Jazz

Diesel Bomber

Joined: Mar 2007

Posts: 8,658

Likes: 504

From: Wisconsin

Like said above
Fuel pressure gauge is definitely needed on stock or modded trucks. The lift pumps are known to go out on these trucks and when they do you can still drive them normally for a while without knowing sometimes and it will eventually take out your injection pump, which is quite expensive compared to a lift pump A exhaust temperature gauge would be a very good idea so you don't get to hot and melt it down. With a drag comp and stock injectors and turbo I think you will still see some pretty hot temps. Do you tow?