injectors and manual conversion
Diesel Bomber
Joined: Jul 2010
Posts: 1,176
Likes: 28
From: knox county tn
well if ur wantin speed stay auto if u like jamming gears go with a 5 speed and i read where u said wats a dv i didnt catch that at first but its a fuel delivery valve they sit on top of ur pump they feed ur injectors basically. with a twin set up like a 3000 and a 5000 ur at a great start for alot of things u want to do but definetly gauges and a 5 inch exhaust not 4 might as well go big on exhaust at first for later days. is there a certain hp ur wantin or just info on injectors? how much do u tow or is it a grocery getter
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 68
Likes: 2
From: troy missouri
i want a 5 speed bc im on #5 auto trans and hp i dont know just a 2wd so going for speed and also my daily driver for now im at a little over 300hp right know with a good trans and dont haul to mutch a bobcat every once in awhile
Diesel Enthusiast
Joined: Oct 2009
Posts: 113
Likes: 3
From: LeRoy WI
there is all sorts of injectors 5 holes 6 holes 7 holes 8 holes etc.
5x10 which comes stock in a 98 manual 5x.010" come in 96-98 manual
5x12 90hp
5x13 not sure but thats a 370 injector
5x14 140 hp
5x16 not rated but i think its a 200 hp
5x18 240 hp
5x20 dont do it
6 holes are 24 valve and none for 12 valve if im thinkin rite and 7 holes are for 12 valve 1st gen 12v have 6 hole, you can run them in a p pump application also. 7 hole is standard for the 24v
secondly on the nv4500 goin fast its all about the gear ratio of your truck is the big thing. motor work will just get u there faster
on the boost elbow im no pro on it but it has a screw that u adjust which restricts airflow
5x10 which comes stock in a 98 manual 5x.010" come in 96-98 manual
5x12 90hp
5x13 not sure but thats a 370 injector
5x14 140 hp
5x16 not rated but i think its a 200 hp
5x18 240 hp
5x20 dont do it
6 holes are 24 valve and none for 12 valve if im thinkin rite and 7 holes are for 12 valve 1st gen 12v have 6 hole, you can run them in a p pump application also. 7 hole is standard for the 24v
secondly on the nv4500 goin fast its all about the gear ratio of your truck is the big thing. motor work will just get u there faster
on the boost elbow im no pro on it but it has a screw that u adjust which restricts airflow
Thread
Thread Starter
Forum
Replies
Last Post
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
Jan 7, 2015 02:29 PM
