Hey guys new to the site, was just wondering what injectors I should run for my cummins, it's an 06 dodge cummins 6 speed manual, I got after market cold air intake and straight pipe exhaust including both manifolds, cp3 fuel pump and gauges.

 

Depends on what you want to do! 60 over for a DD is fine. Always buy new the remans are junk. Also put a two micron filter before the CP3!

 

It is my dd, I just want big enough injectors to where I have the power if I need it as in towing or what not, I was thinking 60hp or 90 hp injectors but I didn't know if 90s would be too much. I do plan on upgrading the turbo at some point as well as the intercooler

 

If MPG are an issue use the 60's 90's will drop your DD mileage.

 

I would do 60's give you a nice boost in power, make sure to get a get fuel setup on the truck something with a 2 micron filter. These common rails love good clean fuel! 90's would work if you just drove the truck with no real towing or very light towing.

 

Ok sweet, thanks a bunch for the advise!! I'll end up getting 60s when it comes time to upgrade!