13s with wh1c,6 blade hx40?
Thread Starter
|
Diesel Enthusiast
Joined: Feb 2012
Posts: 109
Likes: 1
From: K-Beach AK
Side to side , up and down but not any in and out that I tell. I pulled it off the other day and drilled the divider and readjusted the wastegate. I thought it was stuck shut but the po had it tightened so it would not open. I was hitting 42 psi now I'm at 35 as I bury the pyro by 35-40 mph. If I roll into the throttle I will barely bury the 1500 pyro but as soon as I hit lock up in od it starts dropping back down to 1200-1300. And it does this with little to no smoke. Only when I floor it from a dead stop or cruising at a low rpm.
hey Mike, if you get a 4in downpipe your egt's will drop quite a bit. you will probable be suprized at what you get by freeing up the exhaust side of things before you bite the bullet on a different turbo.
Thread Starter
|
Diesel Enthusiast
Joined: Feb 2012
Posts: 109
Likes: 1
From: K-Beach AK
Does a 4" system come with a down pipe? I found a diamond eye down 4" pipe for 120.00
---AutoMerged DoublePost---
I mean 108.00$ it's for a hx40 though
---AutoMerged DoublePost---
I mean 108.00$ it's for a hx40 though
Last edited by SCHMITTY; Sep 11, 2012 at 09:44 PM. Reason: Automerged Doublepost
Diesel Bomber
Joined: Mar 2007
Posts: 1,595
Likes: 57
From: Houston Tehas
12s on an hx35? I thought I read an old thread i found on the web saying someone went that fast. My wh1c only has a little play right now so hopefully I can abuse it for awhile longer until it breaks or I get something better. I have a few older vehicles for sale- funding for my transmission upgrades. If I get all three sold around the same time I may get a billet input as well as a single disk and shift kit or valve body. Thanks for the help everybody
I've heard of ~430hp running a hx35 with a stock long block. If you get it light enough, that could do 12s. 
Or... you could send parts flying trying. 
You could always go with a larger turbine housing and spray the hell out of it too.
For me to hit 12s, it took a 62/65/12, 5x12s and 024 DVs.
If your turbo has a little bit of side to side play, that's ok. If it has any in and out play, I wouldn't push it.
Or... you could send parts flying trying. You could always go with a larger turbine housing and spray the hell out of it too.
For me to hit 12s, it took a 62/65/12, 5x12s and 024 DVs.
If your turbo has a little bit of side to side play, that's ok. If it has any in and out play, I wouldn't push it.
Truth^
Thread Starter
|
Diesel Enthusiast
Joined: Feb 2012
Posts: 109
Likes: 1
From: K-Beach AK
When I pulled my my turbo I noticed how much extra material there was in the turbo flange on the exhaust manifold compared to the gasket. Also inside the exhaust housing on the turbo. I was drilling my divider out and inspecting my wastegate that was not working. It works now. I did see some 150.00 dollar hx52 cores on ebay. Lol
Thread
Thread Starter
Forum
Replies
Last Post
Callmecowboy
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
Jun 27, 2015 04:30 PM
BIG SOCHA
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
Oct 23, 2014 11:01 PM
