5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

starting problem

Thread Tools
 
Search this Thread
 
Old Jan 22, 2011 | 09:12 PM
  #1  
Ramman64's Avatar
Thread Starter
|
Newbie
Joined: Jan 2011
Posts: 3
Likes: 0
Default starting problem

Ok I am new here and searching for an answer. Truck wont start in this cold weather when its been sitting. If its plugged in it will start with out a hasle. For it to start on a cold start I would have to spray it with brake clean, which I know its not the best way to do. Any ideas would be helpful and responses are welcome.
 
Reply
Old Jan 22, 2011 | 09:20 PM
  #2  
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default

sounds like your grid heater relay's arnt working either the relays are bad, the fuse links are blown, or the air temp sensor isnt tellin them to come on....no check engine light?
 
Reply
Old Jan 26, 2011 | 08:59 AM
  #3  
barkrulz's Avatar
Diesel Enthusiast
Joined: Jun 2010
Posts: 180
Likes: 13
From: Florabama, PCB
Default

I had a similar problem. when i'd turn my truck to on the heater would show as on and the volts would be around 9, when it shut off it would take a few seconds and i could hear a soleinoid close (sounds like one anyway) and the volts would come up to 12+ and i could start the truck. If i try to start it b-4 i hear that sound it cranks over two or three times and acts like a dead bat. If i wait for the sound and the rise in volt reading no problems.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
Jake9473
Ford Powerstroke 94-98 7.3L
7
Jul 22, 2018 08:19 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
Sep 14, 2015 06:34 PM
hurriedcoyte
Diesel In Distress - Support Ticket
3
Jun 19, 2015 06:26 AM
Jmohr52
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
Nov 2, 2014 08:55 PM




All times are GMT -5. The time now is 05:00 PM.