I have a 2004 Dodge Ram 2500, 5.9 Vin code "C", Auto Trans, 2 wheel drive SLT. Was warming up and it died and jut cranks and no start. Replaced in tank lift pump and relay up on firewall, cleaned battery connections. I have good ground to the fuel pump and no power, I jumped hot wire to 12 volts, can hear pump but still no start. I m not sure where to go from here, I have a scanner, it communicates with computer and did have a p0111 when problem first started. Can a p0111 cause it to loose power to fuel pump?