24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

no power steering at idle

Old Jul 4, 2011 | 12:08 AM
  #1  
zrendel's Avatar
Thread Starter
|
Diesel Fan
Joined: Apr 2009
Posts: 52
Likes: 1
From: Miami,OK
Default no power steering at idle

my 01 dodge had perfect steering then i decided to do a doughnut (i know bad idea). after i let out of it i had no power steering. checked fluid was low so i added some. was fine the rest of the night. then next morning i got in the truck had perfect steering then it started to fade. now i have no power steering at idle but when i rev the engine up i have it. ive checked fluid level still good.do you think i might have air locked it? or pump went bad? had a friend tell me i might of broke the shaft inside. any help or testing procedures would be greatly appriciated.
 
Reply
Old Jul 4, 2011 | 07:59 AM
  #2  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

If you worried about a broken shaft, carefully open the reservoir while the engine is running. There should be some fluid splashing around. For air lock, I believe the procedure is to crank the wheels each direction as far as you can, multiple times. I like to do it with the wheels in the air so you don't scuff your tires. Otherwise, I think your looking at a powersteering pump. There not expensive, if you don't get one from Dodge.
 
Reply
Old Jul 4, 2011 | 09:44 AM
  #3  
01quadcab's Avatar
Diesel Bomber
Joined: Jun 2007
Posts: 2,664
Likes: 153
From: Shingletown ca
Default

when the steering fades how are the brakes?
 
Reply
Old Jul 4, 2011 | 10:08 AM
  #4  
zrendel's Avatar
Thread Starter
|
Diesel Fan
Joined: Apr 2009
Posts: 52
Likes: 1
From: Miami,OK
Default

the brakes all seems to be fine. when steering fades and when working. i tried with the cap off moving the wheels. did it a couple times and still no steering at idle and perfect steering when reved up to and over 1000 RPM. i went ahead and bought a new pump but befor i go about the job of putting it on i figured i better get some advice and see what you all thought.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Antwhite19
12 Valve 2nd Gen Dodge Cummins 94-98
4
Aug 23, 2015 06:07 AM
ramrunner01
24 Valve 2nd Gen Dodge Cummins 98.5-02
7
Jun 1, 2015 12:10 AM
1MooseheadPlease
Chevy/GMC 6.2L and 6.5L
3
Oct 13, 2014 05:33 AM
sweetv8s10
12 Valve 2nd Gen Dodge Cummins 94-98
3
Oct 7, 2014 09:47 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:37 AM.