24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

02 Auto Trans

Old Mar 13, 2011 | 03:15 PM
  #1  
Laster's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2011
Posts: 36
Likes: 0
Default 02 Auto Trans

I recently bought a 02 Dodge 2500 4wd auto, bone stock w/ 58,000 miles. I was driving it today and it won't stay in overdrive. About 55-60 mph or 1500-1700 rpm seems to be the worst about kicking in an out. I was on flat roads maintaining a steady speed. I'm new to auto transmissions behind a Cummins but this don't seem right.
Help or suggestions appreciated.
 
Reply
Old Mar 13, 2011 | 05:13 PM
  #2  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

Sounds like your Torque Converter is locking and unlocking. Its caused by an electrical noise. Only real fix I found was to install a DTT Noise Filter.


DTT Performance Diesel Transmission and Power Accessories
 
Reply
Old Mar 13, 2011 | 05:54 PM
  #3  
Laster's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2011
Posts: 36
Likes: 0
Default

Thanks for the info, are these much trouble to install?
 
Reply
Old Mar 13, 2011 | 07:56 PM
  #4  
turbo20psi's Avatar
Diesel Bomber
iTrader: (1)
Joined: Mar 2009
Posts: 3,228
Likes: 180
From: MD,NC
Default

Originally Posted by Laster
Thanks for the info, are these much trouble to install?
No it is not hard to install.. There a pic in my profile with it installed ..check your grounds on the battery and also from the battery to the block,ECM,Everywere there is a ground for cleaniness and that there tight.
 
Reply
Old Mar 13, 2011 | 08:24 PM
  #5  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

You could also try this.
http://www.suncoastconverters.com/im...d%20rewire.pdf
I tried this, but a little different. I didn't cut and extend both wires, I just put one wire in from a cab ground to the ground wire of the APPS, t-ing it in.
 
Reply
Old Mar 14, 2011 | 12:20 AM
  #6  
Ramrob02's Avatar
Diesel Fan
Joined: Oct 2009
Posts: 24
Likes: 3
From: Roseville ca.
Default

hello, I have posted a fixed that helped. I have a 02 cummins automatic, Several people on here have good results with and it, wont cost you anything but your time. There is a neutral ground wire that run fromthe alternator area to the battery on the passenger side by the aircleaner. its a large black with a white stripe on it. follow this wire back to the alternator, it will run into a large wire loom under the valve cover. remove this large black and white striped wire from this loom it will end with 3 or 4 smaller 16ga black w/white striped wires at the end. Now zip tie this wire to the top raditor hose away from the large wire loom. Reason being this large black white striped wire is neg. the wires in the large loom are pos. This fix total cured my problem with lock-up, I also am ruuning a BD noise diode. but this is what totally cured my problem!
 
Reply
Old Mar 14, 2011 | 12:40 PM
  #7  
Laster's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2011
Posts: 36
Likes: 0
Default

Thanks guys for all of your help. I will definately look into these suggestions!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DieselDan_5.9
5.9 Liter CR Dodge Cummins 03-07
3
Jul 30, 2015 07:05 AM
Beau_Jacques
5.9 Liter CR Dodge Cummins 03-07
3
Jun 26, 2015 12:17 PM
kydieseltech
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
May 28, 2015 05:00 AM
apehangerjoe
Chevy/GMC 6.2L and 6.5L
2
Mar 26, 2015 03:01 AM
countryboy040993
12 Valve 2nd Gen Dodge Cummins 94-98
22
Nov 12, 2014 11:25 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:23 PM.