24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

02 Auto Trans

Thread Tools
 
Search this Thread
 
  #1  
Old 03-13-2011, 03:15 PM
Laster's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Posts: 36
Received 0 Likes on 0 Posts
Default 02 Auto Trans

I recently bought a 02 Dodge 2500 4wd auto, bone stock w/ 58,000 miles. I was driving it today and it won't stay in overdrive. About 55-60 mph or 1500-1700 rpm seems to be the worst about kicking in an out. I was on flat roads maintaining a steady speed. I'm new to auto transmissions behind a Cummins but this don't seem right.
Help or suggestions appreciated.
 
  #2  
Old 03-13-2011, 05:13 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

Sounds like your Torque Converter is locking and unlocking. Its caused by an electrical noise. Only real fix I found was to install a DTT Noise Filter.


DTT Performance Diesel Transmission and Power Accessories
 
  #3  
Old 03-13-2011, 05:54 PM
Laster's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Posts: 36
Received 0 Likes on 0 Posts
Default

Thanks for the info, are these much trouble to install?
 
  #4  
Old 03-13-2011, 07:56 PM
turbo20psi's Avatar
Diesel Bomber
iTrader: (1)
Join Date: Mar 2009
Location: MD,NC
Posts: 3,228
Received 180 Likes on 149 Posts
Default

Originally Posted by Laster
Thanks for the info, are these much trouble to install?
No it is not hard to install.. There a pic in my profile with it installed ..check your grounds on the battery and also from the battery to the block,ECM,Everywere there is a ground for cleaniness and that there tight.
 
  #5  
Old 03-13-2011, 08:24 PM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

You could also try this.
http://www.suncoastconverters.com/im...d%20rewire.pdf
I tried this, but a little different. I didn't cut and extend both wires, I just put one wire in from a cab ground to the ground wire of the APPS, t-ing it in.
 
  #6  
Old 03-14-2011, 12:20 AM
Ramrob02's Avatar
Diesel Fan
Join Date: Oct 2009
Location: Roseville ca.
Posts: 24
Likes: 0
Received 3 Likes on 1 Post
Default

hello, I have posted a fixed that helped. I have a 02 cummins automatic, Several people on here have good results with and it, wont cost you anything but your time. There is a neutral ground wire that run fromthe alternator area to the battery on the passenger side by the aircleaner. its a large black with a white stripe on it. follow this wire back to the alternator, it will run into a large wire loom under the valve cover. remove this large black and white striped wire from this loom it will end with 3 or 4 smaller 16ga black w/white striped wires at the end. Now zip tie this wire to the top raditor hose away from the large wire loom. Reason being this large black white striped wire is neg. the wires in the large loom are pos. This fix total cured my problem with lock-up, I also am ruuning a BD noise diode. but this is what totally cured my problem!
 
  #7  
Old 03-14-2011, 12:40 PM
Laster's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2011
Posts: 36
Received 0 Likes on 0 Posts
Default

Thanks guys for all of your help. I will definately look into these suggestions!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DieselDan_5.9
5.9 Liter CR Dodge Cummins 03-07
3
07-30-2015 07:05 AM
Beau_Jacques
5.9 Liter CR Dodge Cummins 03-07
3
06-26-2015 12:17 PM
kydieseltech
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
05-28-2015 05:00 AM
apehangerjoe
Chevy/GMC 6.2L and 6.5L
2
03-26-2015 03:01 AM
countryboy040993
12 Valve 2nd Gen Dodge Cummins 94-98
22
11-12-2014 11:25 AM



Quick Reply: 02 Auto Trans



All times are GMT -5. The time now is 04:06 AM.