ABS Booster
#1
ABS Booster
Pulled in the driveway and turned off the truck and a buzzing noise was still on... Located the noise, and it was coming from the ABS booster controller. I unplugged it and the ABS and Brake light came on. I still have brakes just no ABS, any help with this matter will greatly appreciated... Can i just replace the motor part of it or do i have to replace the thing!
It's on a 2000 quad cab, SLT
It's on a 2000 quad cab, SLT
Last edited by Xforce_nut; 03-10-2011 at 04:17 PM.
#5
RAWilliams,
If it is the ABS it will continue buzzing or running. The only way to stop it is by pulling the fuze. At least that was the case with mine.
Xforce,
I found one from an online salvage yeard on crackBay for a decent price. Mine lasted 269 thousand miles, so the used part came from a truck with 188k on the clock. From what I understand you need to have the unit set with your VIN once you put it on. I have not done that to mine and it has worked just fine. Until I was able to find one, I just ran it without the fuze. Still have brakes, but no ABS....so be aware. Hope this helps.
oudive
If it is the ABS it will continue buzzing or running. The only way to stop it is by pulling the fuze. At least that was the case with mine.
Xforce,
I found one from an online salvage yeard on crackBay for a decent price. Mine lasted 269 thousand miles, so the used part came from a truck with 188k on the clock. From what I understand you need to have the unit set with your VIN once you put it on. I have not done that to mine and it has worked just fine. Until I was able to find one, I just ran it without the fuze. Still have brakes, but no ABS....so be aware. Hope this helps.
oudive
Thread
Thread Starter
Forum
Replies
Last Post