tranny swap
#1
#2
#4
#6
take out the dummy plug and plug your master cylinder into it. this is not a very hard project. did it on my 95. you will need to get your driveshafts shortened/lengthened and really everything is straight forward took me and my dad when i was 16 a day and a half to have it completely done.
#8
take out the dummy plug and plug your master cylinder into it. this is not a very hard project. did it on my 95. you will need to get your driveshafts shortened/lengthened and really everything is straight forward took me and my dad when i was 16 a day and a half to have it completely done.
Thread
Thread Starter
Forum
Replies
Last Post
B.k. Smith
12 Valve 2nd Gen Dodge Cummins 94-98
10
01-07-2015 02:29 PM