Banjo bolt for the VP
#1
Banjo bolt for the VP
I've got 2 banjo bolts that don't thread into the VP correctly. I surely don't want to crosstread that thang in, both bolts are Autometer, part#2276, there just not the right thread. Anyone else had simular problems? I've checked them in 3 different VPs, and the stock fitting twisted right in them all. Anywhere else I can get a banjo bolt for my Issopro?
I am talking about the fuel line, not return line.
I am talking about the fuel line, not return line.
#2
Youre talking about a tapped banjo bolt? Should be M12 X 1.5 iirc.
http://www.vulcanperformance.com/ban...cess-p/tbb.htm
has them as will any of our other sponsors.
http://www.vulcanperformance.com/ban...cess-p/tbb.htm
has them as will any of our other sponsors.
Last edited by Dr. Evil; 07-06-2010 at 11:41 AM.
The following users liked this post:
Billy D (07-06-2010)
#3
#4
To hook your tach up?? Really?
You probably want something like this:
http://www.vulcanperformance.com/push-lock-p/poet8.htm
Or like this:
http://www.vulcanperformance.com/Fue...ock-p/fpt8.htm
Or do you still have the stock filter housing? If that the case, you want the first one I linked to.
You probably want something like this:
http://www.vulcanperformance.com/push-lock-p/poet8.htm
Or like this:
http://www.vulcanperformance.com/Fue...ock-p/fpt8.htm
Or do you still have the stock filter housing? If that the case, you want the first one I linked to.
Last edited by Dr. Evil; 07-06-2010 at 11:58 AM.
The following users liked this post:
Billy D (07-06-2010)
#5
Thread
Thread Starter
Forum
Replies
Last Post
Alfred Bruce Millett
12 Valve 2nd Gen Dodge Cummins 94-98
7
04-03-2015 01:45 AM
NiNjAassasin545
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-02-2014 11:40 PM