I replaced my VP, put my Raptor 100 on, and a cam sensor, cleared codes, it runs fine, not really impressed, I hooked my Edge back up correctly, seems like my turbos extra whiney now. I did get a new AEM cheap dry filter Now I have these codes, 1693, 1475, 0238, 1596, 0123 GOT CODES?. Its running ok, like I said, not really impressed. I got good fuel pressure(12lbs)at idle, what can I do??

---AutoMerged DoublePost---

 

If you clear them do they return?

 

I just checked again for codes and there all gone. NO CODES

 

Your FP seems a little low, I have mine set up to 18 Idle.

Maybe it's just me.

 

I thought it was 12-15 lbs was the norm, should I turn it up a bit I love that Raptor

 

Ive been setting the airdog 2s at 18-19 at idle depending on the truck,I know its different then a raptor.Dont see the harm in it by turning it up.

 

Not that I have ran a RAPTOR, but 18ish at low idle, and MORE than 10 PSI at WOT would be good,

 

My truck is really happy at 20psi. It doesn't drop at all down the track now.

 

I run my VP truck at 20psi and it doesnt drop below 15 at WOT