Banjo bolt for the VP
 

I've got 2 banjo bolts that don't thread into the VP correctly. I surely don't want to crosstread that thang in, both bolts are Autometer, part#2276, there just not the right thread. Anyone else had simular problems? I've checked them in 3 different VPs, and the stock fitting twisted right in them all. Anywhere else I can get a banjo bolt for my Issopro?
I am talking about the fuel line, not return line.

Youre talking about a tapped banjo bolt? Should be M12 X 1.5 iirc.


http://www.vulcanperformance.com/ban...cess-p/tbb.htm


has them as will any of our other sponsors.

Yep, the replacement to hook my tach up. 12mm to 1/8". Thats what the packages say, I'm not sure of the exact size:humm:

To hook your tach up?? Really? :s:


You probably want something like this:

http://www.vulcanperformance.com/push-lock-p/poet8.htm

Or like this:

http://www.vulcanperformance.com/Fue...ock-p/fpt8.htm

Or do you still have the stock filter housing? If that the case, you want the first one I linked to.

That's what I need, thanks:c: