metal pieces in the trans pan
#1
metal pieces in the trans pan
i pulled the pan off the trans i got to put my VB in it, and there were lil piecesof metal in there. i pulled the forward hub and overything off the the front half of the trans, and didnt see where it could have came from. it looks like pieces of the retainer for the clutches. i dont think it came out of the overdrive unit.
i figure if it is out of the overdrive unit, it will probably already messed up the clutches and id have to rebuild it any how, so i put it all back together and put it back in the truck, and if it messes up, ill pull it back out and rebuild it right.
what do yall think
i figure if it is out of the overdrive unit, it will probably already messed up the clutches and id have to rebuild it any how, so i put it all back together and put it back in the truck, and if it messes up, ill pull it back out and rebuild it right.
what do yall think
#2
#3
#4
#6
I think I would pull it down. I lost the C-clip putting my valve body in one time. I was doing it on Dunrite's lift and Tony told me I HAD to get it out. When he had a shop in Southern California one of his guys lost one and they decided to let it stay. Ended up taking the tranny out. Metal floating around is NEVER good in mechanical things.
Thread
Thread Starter
Forum
Replies
Last Post
itvinny
Diesel In Distress - Support Ticket
1
06-19-2015 09:26 PM
itvinny
Diesel In Distress - Support Ticket
1
06-19-2015 09:21 PM