2002 Cummins Codes and Dead Pedal
#21
#24
yes dead pedal cause there is not any speed signal for the ECM to process. And the ECM controls the VP44 fueling. Also you mentioned the tach erratic may be all cause of a bad cam sensor.
That's what I would try first wish I had the OHM readings for you on the Cam sensor we could check it. But at this point it seems likely its the problem and cheap enough its worth a try.
That's what I would try first wish I had the OHM readings for you on the Cam sensor we could check it. But at this point it seems likely its the problem and cheap enough its worth a try.
Last edited by Jet A Fuel; 07-31-2016 at 10:49 AM.
#25
I found two on ebay, one has threads and one does not. the threaded one is 39 the push in is 18 dollars.
#27
#28
not yet, the truck has a temp gauge on the post. gonna dig under the dash as well. Also there is a three prong plug next to the pcm that has nothing plugged into it and no male deadend kinda open to the environment.
#29
#30