2002 Cummins Codes and Dead Pedal
#51
08-19-2016, 03:17 PM
I was leaning toward injection pump since we are getting reference voltage to the sensors from the ECM. Also the age of the pump is pretty high.
No induction boost sensors on the 1998.5 to 2002 to my knowledge.
You should take the torx screws (6 each i think) out of the electronics cover on the VP44 and see if you have a melted solder joint at that printed circuit board.
No induction boost sensors on the 1998.5 to 2002 to my knowledge.
You should take the torx screws (6 each i think) out of the electronics cover on the VP44 and see if you have a melted solder joint at that printed circuit board.
We will see.
#52
08-27-2016, 08:36 AM
#53
09-03-2016, 12:00 PM
Diesel Bomber
#54
09-17-2016, 01:21 PM
Diesel Bomber
