The cruise control light does not come on I changed the switch and that didn't help from what I can tell this truck has and ecm controlled cruise instead of vacuum controlled cruise regardless all blower positions work(no broken vacuum lines&#128513
This truck is an 02 3500 4x4 6speed manual any help or points n the right direction would b greatly appreciated

 

Any ABS light or codes?

 

could be the clock spring in the steering wheel.

 

Idk bout codes I'll c what the smarty says later
How do I go about checking the clocks spring?!?

 

Well I plugged the smarty n today and she didn't have ne codes stored n her
Do I prolly need to 2 look n2 the clock spring ?!?!

 

I have heard people having issues with the clock spring not letting the cruise kick on. How to change it out I don't know but I am sure there are a few write ups on google.

 

Sounds like the clock spring. It's located in the steering wheel column. Does your horn work?

 

Yea the horn works just fine.. And can the clock spring still b bad even tho no airbag lights or on

 

Yes it can still be the clock spring even without any air bag lights.

 

Found my problem it was a broken wire right at the plug in where my tilt steering tilts not bad once I got all the plastic off thanks for all the advice guys I hope y'all can c the picture gonna get some solder tommorow and then on with the fass install��